Car Paint

Pinstriping a car can add extra beauty and admiration to it. Pinstriping is a treatment which every spray painted car receives when the primer and other spray paints are applied, making the car to look flashy, classic and great. However, car owners can apply even an extended design called custom car paint pinstriping.

Custom car paint pinstriping can be done on the side of the car by making simple and yet nice designs which can be painted on the body of the car especially at the center of the tailgate like the trunk of a car.

Step one – Wash Your Car Thoroughly.
Before you apply a custom car paint Pinstripe, make sure the car is cleaned thoroughly by washing with water so that the dusts and other particles which settled on the body is erased.

Step Two – Use Wax and Grease to Wipe Areas to be painted
Use wax and grease remove to wipe the areas that need the designs. This is especially useful because it will remove any extra oil and fingerprints which may cause imperfections while applying your custom car paint pinstriping designs.

Step Three – Draw a Specimen Picture to Refer To.
In order to get a nice pinstripe, you need to draw a picture on paper of how you will apply your designs and colors, this is solely because, it is painted with hands with no masking tape. You need to practice and master the act effectively before you head on to a car.

Step Four – Use the Tip of the Brush in a Smooth Steady Motion.
To begin, use the tip of the pinstripe brush to apply the paint. To get a nice job, use a smooth steady motion while painting. Start from the front of the vehicle and halt when you get to the front fender and front door to observe your work.

Step Five – Avoid Distractions In order to get straight pinstriping.
To make sure the line are straight, avoid distractions. Resume your work and stop at the rear end of your car if it is a truck. Your custom car paint pinstripe needs to be straight and professional that is the major reason why you are not rushing it.

Step 6 – Allow Your Car to Dry.
Allow at least 24 hours for your custom car paint pinstriping designs to dry before moving the car.

Step Seven – Safety tips
After pinstriping, do not wax your car for the next 30 days.

By: Michael Chibuzor

About the Author: